About Conductivity Point Level Switches
Conductivity Point Level Switches
Well equipped with all advanced facilities, we manufacture and supply a wide range of Conductivity Point Level Switches. In these switches, no special cable is required for signal transmission. Our offered conductivity switches are demanded across the market for their easy installation, less maintenance and high efficiency & accuracy. These Conductivity Point Level Switches are mostly used in diverse industries to detect level of conductivity of non sticky liquids such as milk, water, juice, acid, salt & various chemicals.
Technical Specifications (Standard):
Switching Unit:
-
Housing: Aluminum, weather proof, powder coated. for back panel mounting /DIN Rail mounting
-
Cable entry: As per housing option.
-
Ambient temperature: 0 oC to +60 oC
-
Power consumption: 1.9 VA
-
Mains Voltage: 230/110 V AC (+/-15%), 50 Hz or 24 V DC ,Or 65 to 265 V Ac
-
Output: 1 / 2 sets of potential free c/o contacts rated at 10 amps, 250 V AC for non-inductive loads.
-
Safety operation: Field selected switch over for min. or max. (FSL/FSH) switching points.
-
Switch status display: Green LED shows Normal, Red LED shows alarm.
-
Response Time: 0.5 Sec
Salient Features:
-
No moving part,.
-
Long cable connection permissible between probe and evaluation unit.
-
AC on probes for prevention of electrolytic deterioration of electrodes.
-
Low voltage on probe for operational safety.
-
Variety of control functions and installation system available, beside single point switching.
-
Two point action for automatic pump control.
-
Two point independent switching.
-
Three point switching, two points with pump control logic and one independent point.
-
Four point switching having two-pump control logic.
-
Multichannel -4 point independent switching available for various process conditions
-
Variety of probes available for various process conditions.
Send Inquiry
Send Inquiry
Send Inquiry
Send SMS
Call Me Free
