Boot Level Switches
We, at Jaycee Technologies Private Limited take pride to introduce ourselves as a leading manufacturer and supplier of Boot Level Switches. Appreciated for its outstanding performance, easy installation and durability, these switches are extensively used in various industries for indicating, controlling and regulating the level of granulated or powdered dry materials. We are offering these switches to our clients at unbeatable prices. With the support of our diligent professionals, we are able to fulfill bulk order of Boot Level Switches.
Steel or Neoprene Diaphragm level switch for Boot level application and Food grain hoppers.
The JAYCEEBOOT level switch is with a grain diameter up to 30 mm and a density of 0.3 to 2.5 g/cm3,
The JAYCEEBOOT consists of a microswitch inside a cast Al housing, covered by a flexible diaphragm
Normal sensitivity: 100 gm / 500 gm Diaphargm Membrane material: Nitrial Rubber / SS ax. work ambient temperature: 60o Microswitch contacts: 15 Amp, 230 V AC, Potential free
Cable Gland: PG 11
Housing: Cast Al
Protection: IP 40
Installation And Mounting
The JAYCEEBOOT can be installed outside the container by making a hole on the wall, so that the membrane remains exposed to the product inside. Suspended by means of a tube, it can be also installed inside the container. Using adaptors, it can be installed in pipes and conduits.
Wherever possible level switch should be mounted on vertical surfaces. By this means, the product can flow free downwards, and wrong indications are avoided. It can be mounted on surfaces with a slope of not more than 30 degrees from vertical, provided that the product leaves the membrane thoroughly free when flowing along. If maximum levels are to be controlled, the devices must be mounted at such a height that the product overflowing the membrane can exert pressure on this membrane, working the microswitch.